Heating Bath Circulator (General), CW3-05/CW3-10/CW3-20/CW3-30
PriceFrom HK$7,234.40
External and internal circulation with powerful pumping capability
Performance
- Temperature range from ambient +10℃ to 150℃.
- Microprocessor PID control.
- Three point temperature calibration / Automatic tuning / Automatic run.
- Accurate, stable, and efficient temperature management by using a powerful variable-speed pump.
(1 to 3 steps of pump for internal circulation and 4 to 5 steps for external circulation).- Powerful pump pressure and flow rate throughout the whole temperature range.
Convenience
- Bright VFD display with quick adjustable dial knob. (0.1℃ resolution)
- Dual wait on/off timer modes. (1 min. to 99 hr. 59 min.)
- Convenient memory function of up to three frequently set temperature.
- Corrosion-resistant, leak-proof, round-cornered, and easy-to-clean stainless steel bath with easy access drain valve.
- RS-232 /USB interface for external control and data collection.
- Side handles enables convenience handling and transport.
- Monitor via mobile app anytime, anywhere with LC Connected (mobile monitoring system) connection. (when purchased LC GreenBox)
Safety
- Isolated design of agitator, heater, and sensor by a baffle plate to minimize the turbulence in the bath fluid and also to protect users and samples against direct contact.
- Complete safety protection system with warning alarms.
- Low fluid level and dry-running, over-temperature, over-current.- Keypad lock function prevents accidental changes during operation.
Specification
Accessories & Options
Brand: Jeio Tech
| Model | CW3-05 | CW3-10 | CW3-20 | CW3-30 |
| Bath volume (L / cu ft) | 5 / 0.2 | 10 / 0.4 | 20 / 0.7 | 30 / 1.1 |
| Working temperature range 2) (℃ / ℉) | Amb. +10 to 150 / Amb. +18 to 302 | Amb. +10 to 150 / Amb. +18 to 302 | Amb. +10 to 150 / Amb. +18 to 302 | Amb. +10 to 150 / Amb. +18 to 302 |
| Temperature stability 1) (±℃ / ℉) | 0.05 / 0.09 | 0.05 / 0.09 | 0.05 / 0.09 | 0.05 / 0.09 |
| Heat up time to 70℃ / 158 ℉ (min) | 15 | 23 | 43 | 55 |
| Bath opening / depth (W×L, D) (mm / inch) | 150×99×160 / 5.9×3.9, 6.3 | 211×154×180 / 8.3×6.1, 7.1 | 290×214×200 / 11.4×8.4×7.9 | 300×264×230 / 11.8×10.4×9 |
| Exterior (W×L×H) (mm / inch) | 228×395×424 / 9.0×15.6×16.7 | 289×450×444 / 11.4×17.7×17.5 | 368×510×464 / 14.5×20.1×18.3 | 378×560×494 / 14.9×22×19.4 |
| Net weight (kg / lbs) | 12.5 / 27.6 | 15.0 / 33.0 | 17.5 / 38.6 | 19.5 / 43.0 |
| Electrical requirements (230V, 50/60 Hz) | 8.5A | 8.5A | 8.5A | 8.5A |
| Cat. No. | AAH52341K | AAH52351K | AAH52361K | AAH52371K |
※ The lowest temperature that can be controlled depends on changes in ambient temperature and sample temperature. Therefore, please contact the distributor of our products before purchasing for technical consultation.
※ Technical data (according to DIN 12876)
※ In case using silicon oil, you need to exchange other material tube (inlet and out late part), such as copper tube, a teflon tube instead of a silicon tube in fitting.
1) Bath fluid : Water at 50℃ / 122℉
* Remarks: Plastic cover & 1m ⌀12mm silicone tube are included in basis product
